The Marantz 6300 is very popular these days and they command sometimes ridiculous prices. When it was released to the market in 1975 Marantz was still seen as making hi-end audio equipment. Of course, Superscope had owned them for some time by then and, while they did produce good equipment, the mid to late 1970's stuff didn't really live up to perceptions. The 6300 probably falls into that category. I know some people that like it's look but others feel it is a little bulky and overdone. A failed attempt to convey opulence they say. Now, I'm not saying the turntable is bad. It's not. It's a direct drive turntable with a DC servo motor, optical auto-off, and both vertical and lateral balancing. But, by that time most decent turntables had these features and more.
The Marantz 6300 sold for $249.95 in 1975 and was on the market until around 1977. I believe part of the reason for the high demand is that a lot of vintage audio enthusiasts own Marantz receivers and want to complete an all Marantz system. So, they need a Marantz turntable. Of course, an all Marantz system in the audio cabinet would look good!
One common problem with the 6300 is that the pitch, or speed, control gets out of line over the years. This is usually due to a potentiometer, or two, inside the turntable becoming dirty. A quick cleaning with some DeOxit could solve the problem. Also, the feet tend to go missing and they aren't cheap to replace.
While I may sound a little negative regarding the Marantz 6300 it's really only because at the prices they are going for these days a person could very likely get a better turntable for less. Sure, it wouldn't be a Marantz but it would be better. If you're a beginner don't drop hundreds on this turntable. Buy a similar spec Technics or even Thorens. That being said, if you must have a Marantz then expect to pay upwards of $800 for a restored unit, around $500 for an average working table, and even $200 to $300 for a parts unit. Need some feet? Well, that will cost you around $150 for four. Needless to say, you might find better value elsewhere. But, hey, it is a Marantz!
|Marantz 6300 Vintage Turntable|
Time Remaining: 29d 15h 1m
Buy It Now for only: $725.00
|Marantz model 6300 turntable|
Time Remaining: 2d 5h 4m
|UPGRADE FEET FOR MARANTZ 6300 TURNTABLE METAL IRON SET OF 4 NEW|
Time Remaining: 14d 17h 50m
Buy It Now for only: $77.77