Acoustic Research XA

ar-xa

If you’re a fan of minimalist yet elegant design then you’ll probably appreciate the Acoustic Research AR XA turntable. This turntable should definitely have a place in the turntable hall of fame due to its significance. Introduced by AR in 1961 the XA was priced at a very modest $58. But, that wasn’t what made this turntable so important. Previous record players had issues with vibration from the drive mechanism seeping into the audio output. Edgar Villchur, one of the founders of AR and designer of the XA, decided to isolate the tonearm and platter from the rest of the unit. Of course, nowadays that sounds fairly obvious but no previous turntable had utilized this design technique. The XA was produced all the way into the 1970’s.

ar-xa-front

Villchur mounted to tonearm and platter together on a bearing plate that utilized a three point dampened spring mounting system to keep vibration from the plinth, or body, of the turntable from affecting the tonearm and platter. He also introduced a belt drive to turn the platter. If you’ve ever had a turntable that picks up the bass from the speakers when the volume is turned up resulting in a muddy sound then you can appreciate Villchur’s innovations. His design ideas minimized this problem.

ar-xa-back

Even though the AR XA turntable was extremely popular because of both its performance and it’s price Acoustic Research didn’t make money on it.  They had priced it too cheaply and had to slowly raise the price over time before it started to make a profit. Of course, AR sold speakers as well that were also very popular at the time so I’m sure they did well financially despite the early losses on the XA. Before the advent of the XA anyone wanting a turntable basically had to buy one from the same suppliers that radio stations purchased theirs from. Then they would have to build or buy a cabinet or plinth to put the turntable in. The XA made the turntable available to most everyone in one neat package at a very reasonable price.

AR XA

The AR XA is also one of the most modified turntables ever. There were a number of companies that produced upgrades to the table. The most popular were probably the “Merrill Mods”. Some of the mods included:

  • Enhanced speed controllers
  • Enhanced  motors
  • Acrylic-lead turntable mats
  • Acrylic subchassis
  • Center and outer clamps
  • Improved parts

Many feel that the tonearm on the XA leaves a bit to be desired. Even so, with some inexpensive upgrades it can be made to perform very well.

ar-xa-platter

The AR XA weighs roughly 5 pounds including the 3.3 pound platter. Below you can see the T-bar sub chassis that Villchur used to suspend the platter and tonearm.

ar-xa-inside

If you’re looking for a vintage turntable that is easy to set up and sounds great then an AR XA may be for you. It’s a little difficult to find them in good condition given their age but you can also have them modified and setup properly by a professional for a reasonable amount of money. Buy one that’s already been restored and you’ll be spinning vinyl on a great sounding turntable in no time. A mint in original box XA will set you back about $500 but a fully serviced XA can be had for $250 or less. That’s a great value for a great performing turntable.

Right Now on eBay 
Clicking a link to eBay may result in a referral commission being paid if a purchase is made.
Loading…

Here’s Edgar Villchir talking about the AR XA turntable:

9 thoughts on “Acoustic Research XA

  1. My XA, purchased new back in the day, has survived 2 moves, but suffered a blow to the gossamer signal cable and I’m searching for a repair. It’s in otherwise excellent cond. I’d like to find a repair or replacement to install. With such a tiny delicate cable my first thought is I’m done, finished, forget it. But I still love my AR and willing to do anything to restore it. Local shops say junk it. I don’t agree. Sell for parts is not my philosophy.
    Even my dust cover is without a scratch. Please, there’s gotta be an encouraging word somewhere!!

  2. I was told that the AR met broadcast standards by my brother. I wish to know what the applicable broadcast standards were at that time?

  3. I wish to know if thew AR still meets Broadcast standards for those who wish to utilize it for transfers with the Audacity type programs?

  4. I purchased a restored AR XB about five years ago from Vinyl Nirvana with a Shure cartridge. It has performed flawlessly. I love its simplicity and functionality. I don’t believe I could perceive a sonic improvement if I replaced it with a $5000 turntable. I was recently thinking of updating the arm but I’ve changed my mind. Leave well enough alone. It’s “high end” in my book.

  5. I’ve been familiar with the XA since 1973. My music teacher was into hi fi, and convinced the School Board to spend $$ on the nicest gear available. I loved everything about that TT, and still do! I played a lot of records on it back then. I was really bummed when several years later I approached the School about buying it and found out that they threw it in the dumpster!! Sad.

    1. Sounds like WRHS in Columbus OH: the music dept at that time had an AR-XA, ReVox A77, Mcintosh amps, and JBL speakers. Sounded beautiful! That’s where my audiophile journey began, thanks to Messrs. Berry and Maxwell.

Leave a Reply to Bruce Hardy Fisherman Cancel reply

Comments are manually moderated and may not show up immediately after posting. As long as they are not spam they will show eventually. No need to repost.

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.